Microflex SafeGrip Latex Glove, Powder Free, Extended Cuff, 11.6" Length, 11 mils Thick
Extreame Savings Item! Save 41% on the Microflex SafeGrip Latex Glove, Powder Free, Extended Cuff, 11.6'' Length, 11 mils Thick by Microflex at Lola Lo Brighton. MPN: SG-375. Hurry! Limited time offer. Offer valid only while supplies last. The Microflex SafeGrip disposable, chlorinated, powder-free, extended length latex glove has textured fingertips. It has a palm thickness of 11.0
The Microflex SafeGrip disposable, chlorinated, powder-free, extended length latex glove has textured fingertips. It has a palm thickness of 11.0 mils and a finger thickness of 14.2 mils, and is 11.6" long from the tip of the middle finger to the edge of the beaded wrist cuff, which is 7.9 mils thick. The extended length cuff helps protect the hand, wrist, and forearm. The glove is suitable for automotive, emergency medical services, healthcare, industrial safety, laboratory, and mortuary applications. Latex provides better elasticity than nitrile, chloroprene, or vinyl, and better puncture resistance than vinyl. The glove is textured on the ends of the fingers for improved grip compared to a glove with a smooth texture. It has been washed in a diluted chlorine-based solution to help reduce tackiness, providing lower surface friction than a non-chlorinated glove and allowing quick donning in wet environments. This powder-free glove leaves no residue, helping to reduce the likelihood of spreading latex allergens and bacteria compared to a powdered glove. The glove meets the emergency medical glove requirements of the National Fire Protection Association (NFPA) code 1999 (2008 edition). The color of this ambidextrous glove is blue.
Tensile strength, measured in megapascals (MPa), is the amount of force required to rip a glove; the higher the number, the stronger the glove material. This glove has a tensile strength of 34 MPa before aging and 28 MPa after aging. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage, and the higher the percent, the more the glove can stretch. This glove has an elongation of 750% before aging and 600% after aging. Acceptable Quality Level (AQL) is a Food and Drug Administration (FDA) quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves. This glove has an AQL of 1.5, which means the defect level from a large sample of the gloves will not exceed 1.5%. Microflex examination gloves meet or exceed applicable standards imposed by ASTM International, formerly known as the American Society for Testing and Materials (ASTM), and the FDA.
Disposable and limited-use gloves are used in medical, forensic, scientific, art, and industrial applications. Gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for either hand, some can be purchased in hand-specific models. They are offered powdered or powder-free; silicone or silicone-free; chlorinated or non-chlorinated; coated or uncoated; with a standard- or extended-length cuff; sterile or non-sterile; and with textured or smooth fingers, fingertips, and palms. A glove's abrasion, cut, and puncture resistance is defined by glove material and thickness, and may be improved with the use of certain exterior coatings. Abrasion resistance means the glove helps protect the hand from contact with rough objects. Cut resistance means the glove helps protect the hand from blades and sharp instruments. Puncture resistance means the glove helps protect the hand from pointed objects such as pins and needles. Chemical resistance means the glove helps protect the hand from certain chemicals. Chemical resistance is defined by glove material, thickness, and length, as well as the work environment and chemicals likely to be encountered. For information on the chemical resistance of this glove, consult the manufacturer's chemical resistance guide.
Microflex Corporation manufactures disposable gloves. The company, founded in 1988 and headquartered in Reno, NV, meets International Organization for Standardization (ISO) 13485:2003.
Features & Highlights
- Latex provides better elasticity than nitrile, chloroprene, or vinyl, and better puncture resistance than vinyl
- Textured fingertips for improved grip compared to a glove with a smooth texture
- Palm thickness is 11.0 mils and finger thickness is 14.2 mils, and extended length glove is 11.6" long and has a beaded wrist cuff that is 7.9 mils thick
- Chlorinated glove allows for quick donning, particularly in wet environments
- Powder-free glove leaves no residue, helping to reduce the likelihood of spreading bacteria compared to a powdered glove
|Item Weight:||22.9 pounds|
|Package Weight:||26.85 pounds|
|Package Size:||11.3 x 10 x 10 inches|